Original
By certification 
Stainless Steel Diamond Plate
Stainless steel diamond sheet, also known as stainless floor sheet or stainless steel checkered sheet, stainless thread sheet, has a raised diamond lug pattern, functioning skidproof and anticorrosive. Sheye Metal aims to provide customers with different patterns. We can manufacture stainless steel diamond sheet according to ASTM A793. In Sheye Metal, stainless steel diamond plates are always inventoried in 304(L), and 316(L). 2B finish and No.1 finish stainless steel diamond sheet are both available. The thickness of stainless diamond plate we produce ranges from 0.3mm to 12.0mm. Stainless steel diamond sheet are widely used in trailer and truck bed flooring, running boards, walkways, and platforms, etc. It is easy to weld, cut, form, and machine. For Metal, we are serious.
Specification of Stainless Steel Diamond Sheet | |
Size |
Thickness: 0.3 ~ 12.0 mm; Width: 1000 ~ 3000mm; Length: 2000 ~ 6000mm, or as Request. |
Techniques |
Cold Rolled, Hot Rolled |
Surface |
2B, No.1 |
Mill of Origin |
SheyeMetal, Baosteel, ZPSS, TISCO, JISCO, ATI, SMC, HAYNES, VDM, ArcelorMittal, Outokumpo, etc. |
Theoretical Weight(kg/m) |
Weight/meter = T*W*L*7.93(7.98) T in mm, Both W and L in m. |
Note:
L is the specified length.
W is the specified width.
T is the specified thickness
Main Grades and Standards of Stainless Steel sheets
1.Standards:
ASTM A793
2.Materials(Grade):
304, 304L, 316, 316L
3.Pattern
Pattern A: percent of reduction, 61%.
Pattern B: original of raised figures approximately 1-1/4 in., percent of reduction 61%.
Pattern C
Chemical Composition of Stainless Steel Diamond Sheet
Type |
C≤% |
Mn≤% |
P≤% |
S≤% |
Si≤% |
N≤% |
Ni % |
Cr % |
Mo % |
304 |
0.08 |
2.00 |
0.045 |
0.030 |
0.75 |
0.10 |
8.00-10.50 |
18.00-20.00 |
… |
304L |
0.030 |
2.00 |
0.045 |
0.030 |
0.75 |
0.10 |
8.00-12.00 |
18.00-20.00 |
… |
316 |
0.08 |
2.00 |
0.045 |
0.030 |
0.75 |
0.10 |
10.00-14.00 |
16.00-18.00 |
2.00-3.00 |
316L |
0.030 |
2.00 |
0.045 |
0.030 |
0.75 |
0.10 |
10.00-14.00 |
16.00-18.00 |
2.00-3.00 |
Stainless steel diamond sheet material shall conform to the requirements of one of the grades listed in the above table. Annealing shall be the last heat treatment to which the material is subjected by the manufacturer.
Tolerance over Specified Width and Length of Stainless Steel Diamond Sheared Plates, mm.
Note: Any other ordered thickness may be subject to agreement between purchaser and seller.
Specified Dimensions |
Tolerances |
||||
|
Thickness Under 9.5mm |
Thickness 9.5 to12.7, mm |
|||
Width |
Length |
Width |
Length |
Width |
Length |
1219 and Under, mm |
6096 and under, mm |
3.2mm |
4.8mm |
4.8mm |
6.4mm |
Over 1219 to 1524, mm |
6096 and under, mm |
4.8mm |
6.4mm |
6.4mm |
7.9mm |
Packing Information of Stainless Steel Diamond Sheets
Stainless steel diamond sheets from Sheye Metal are packed according to the customer's requirement. To avoid any damage which might be caused during international transportation, we provide some optional packaging methods, including Kraft Water-proofing Paper, Plastic Bags, PVC Coated, Wooden Pallets, and Wooden Boxes.
If you are going to buy high quality stainless steel diamond plate in stock, please feel free to contact Sheye Metal, which is one of the well-known manufacturers and suppliers of good stainless steel diamond plate.
