Original
By certification 
Alloy 600 Plate
INCONEL® (nickel-chromium-iron) alloy 600 (UNS N06600/W.Nr. 2.4816) is a standard engineering material for applications which require resistance to corrosion and heat. The alloy also has excellent mechanical properties and presents the desirable combination of high strength and good workability.
The high nickel content gives the alloy resistance to corrosion by many organic and inorganic compounds and also makes it virtually immune to chloride-ion stress-corrosion cracking. Chromium confers resistance to sulfur compounds and also provides resistance to oxidizing conditions at high temperatures or in corrosive solutions. The alloy is not precipitation hardenable; it is hardened and strengthened only by cold work.
The versatility of INCONEL alloy 600 has led to its use in a variety of applications involving temperatures from cryogenic to above 2000°F (1095°C).
The alloy is used extensively in the chemical industry for its strength and corrosion resistance. Applications include heaters, stills, bubble towers and condensers for processing of fatty acids; evaporator tubes, tube sheets and flaking trays for the manufacture of sodium sulfide; and equipment for handling abietic acid in the manufacture of paper pulp.
The alloy's strength and oxidation resistance at high temperatures make it useful for many applications in the heat-treating industry. It is used for retorts, muffles, roller hearths and other furnace components and for heat-treating baskets and trays.
In the aeronautical field, INCONEL alloy 600 is used for a variety of engine and airframe components which must withstand high temperatures. Examples are lockwire, exhaust liners and turbine seals.
INCONEL alloy 600 is used in the electronic field for such parts as cathode-ray tube spiders, thyratron grids, tube support members and springs. The alloy is a standard material of construction for nuclear reactors. It has excellent resistance to corrosion by high-purity water, and no indication of chloride-ion stress-corrosion cracking in reactor water systems has been detected.
 |
|
|
Specification |
ASTM B 168/ASME SB 168, ASTM B 906/ASME SB 906, ASME Code Cases 1827 and N-253, SAE/AMS 5540, BS 3072NA14 and 3073NA14, DIN 17750, ISO 6208, EN 10095, MIL-DTL-23228.C12 |
STANDARD |
ASME, ASTM, AISI, AMS, JIS, EN, DIN, GB/T |
Grade |
UNS N06600, 2.4816, alloy 600, Inconel 600 |
Thickness of Plate |
4.76MM-70MM and width >250mm |
thickness of sheet |
thickness600mm |
Thickness of Strip |
thickness |
Finish for sheet |
No.1 finish-hot roolled, annealed and descaled |
No.2D finish-cold-rolled, dull finish | |
No.2B finish-cold-rolled, bright finish | |
No.3 finish-intermediate polished finish, one or both sides | |
No.4 finish-general purpose polished finish, one or both sides | |
No.6 finish-dull satin finish, tampico brushed, one or both sides | |
No.7 finish-high luster finish | |
No.8 finish-mirror finish | |
Finish for strip |
No.1 finish-cold rolled to specified thick-ness, annealed, and descaled |
No.2 finish-same as No.1 finish, followed by a final light cold-roll pass, general on highly polished rolls | |
Bright annealed finish-a bright cold-rolled finish retained by final annealing in a controlled atmosphere furnace | |
polished finish-strip is also available in polished finishes such as No.3 and No.4 | |
Finsh for plate |
Hot-rolled or cold rolled, and annealed or heat treated, and blast cleaned or pickled |
hot rolled or cold rolled, annealed or heat treated, blast cleaned and / or ground | |
hot rolled or cold rolled, annealed or heat treated, blast cleaned and / or ground, and pickled | |
Edges for coled rolled strip |
No.1 edge-a rolled edge, either round or square as specified. |
No.3 edge-an edge produced by slitting | |
No.5 edge-an approximately square edge produced by rolling or filing after slitting | |
Delivery condition |
Annealed, hot rolled, cold rolled, pickled, hard |
Product type |
Plate, sheet, coil, strip, foil, ribbon, wire |
Origin of raw materials |
CHINA, USA, EUROPE, JAPAN |
Brand we mainly distributed |
BAO STEEL, He-cheng nickle |
Value added services available |
Cut-to-length |
Laser cutting | |
Third party wittness and test arrangement | |
Edge preparation | |
Color coding | |
Package |
· Wooden Boxes |
· Wooden pallets | |
· Steel Strips Bundled | |
· Standard seaworthy export packing | |
· as required |
http://www.steelbondsg.com/
